When I came home from England I was in desperate need of a creative outlet and my best friend was engaged! Since I had lots of time on my hands I decided to make her a quilt. As I began to think of all the designs I could do I started with simple large squares of fabric but then like most projects It got more and more complex. Until I decided to do a disappearing 4 patch with dresden plate flowers. Both of these techniques were brand new to me. I started by picking out my main fabrics navy blue and white/grey. I pretty much pulled all of these colors off the shelves of Joann's and had them laid out on the counter figuring out what was going to work. After I washed and ironed all my fabric it was time to cut them into 5in squares. 326 squares cut in 4 days! Phew now I can start sewing. I then sewed them into a 4 patch of 2 of the same blue and white. 70 blocks later it was time to cut them all again!


Hansel is the best sewing partner along with my Yorkshire Tea! I cut each block 1.25 in off each seam. Then I rotated the cut pieces around so that the pattern went
white square, blue strip, white strip, blue square. I used this tutorial. And then I sewed them all back up. This took a long time. Something really important that I forgot to do was to iron my seams so that it was easier to sew the blocks together. I dont think you can do it so they lock but it might work better if you ironed them open instead of off to one side. When I squared up my blocks they 7.75 in. I then needed to take a break from all the gray and blue because they were driving me crazy. I move over to figure out how to make my flowers using the dresden plate design. I made a stencil that 1 in on the bottom, 6 in tall, and 3 in centered at the top. I used that stencil to cut out 5 different yellow fabrics. Once I had stacks of trapeziums I sewed the 3 in edge right sides together. You then flip the seam inside out so you get a triangle at the top and iron so it holds its shape making sure the seam is pressed open.





I machine sewed the flowers on going right along the edge of each petal.
I could see then end now and wanted to finish it so bad. It was time to baste and pin it. I used a spray adhesive baster and then pined it in place. Now that it was together I decided to quilt it by going 1/4 in off the main seams on either side. I went right over the flowers and they wrinkled a bit but not too bad. Next time I would have chalked the line I needed to follow. This quilting was a great idea. It looked so good on the top and very clean on the back.

Until my next quilting adventure...